The sun is the universe's most efficient heater. The sun creates combustible gases that warm the earth's surface. That way even during the coldest winter, you are still warmed by the heat radiating from the sun. The gas fired infrared heaters Ohio manufacturers make work in somewhat the same way. They use fuel to warm objects below them, such as floors, tools, machinery, and people. The warmed objects, in turn release heat into the atmosphere, which warms it.
This type of heating is a godsend for industrial businesses that operate in large, open space warehouses. Many of these businesses resort to forced air heaters that are built into the ceilings of their facilities and blow hot air at the rate of a jet engine. This can work for some businesses, but it is inefficient and expensive. Infrared heating is up to fifty percent more efficient than forced air.
This type of heating can be high intensity or low intensity. The high intensity has been around for almost seventy years. It operates with an open flame and requires a high mounting. A reflector is used to direct the heat source.
This works well in an area where there aren't many workers and the area is not vented. Low intensity heating replicates the sun by generating radiant heat. This heater is usually suspended from ceilings by chains and are under the control of a thermostat.
Low intensity heaters have an enclosed flame. In order to produce heat a burner box triggers a mix of air and gas. A fan forces the air and gas mixture through tubing. The tube emits heat energy from the gas onto reflectors, which direct the warmth onto the floor. The objects in the direct line of the reflected heat warm the space to a comfortable level. This kind of heat starts at the ground level instead of the ceiling to create heat in the space.
If your warehouse space uses forced heat, each time someone opens a door the heat goes out. The system must start all over heating the space. With infrared heat, the heated floor acts the same way a reservoir does. It retains extra heat and will continue to heat the space until the heat lost by the open door is marginalized. This is a real benefit for industrial and commercial businesses that have loading docks in regular use.
There are a lot of benefits to using this kind of heating. One of the biggest is the financial savings. Forced air heating is about fifty percent less effective than infrared heat. This heating system is quieter, cleaner, and doesn't blow debris and dust all over the space like those that rely on blowers. This sort of heating as zoned capabilities. It can function independently or as a unit.
There are safety considerations to be taken into account when using this heater. You have to keep certain objects at a safe distance from the heaters when they have lower temperature ratings. It is important to shield certain items like lighting, gas and electrical lines, and parked cars.
This type of heating is a godsend for industrial businesses that operate in large, open space warehouses. Many of these businesses resort to forced air heaters that are built into the ceilings of their facilities and blow hot air at the rate of a jet engine. This can work for some businesses, but it is inefficient and expensive. Infrared heating is up to fifty percent more efficient than forced air.
This type of heating can be high intensity or low intensity. The high intensity has been around for almost seventy years. It operates with an open flame and requires a high mounting. A reflector is used to direct the heat source.
This works well in an area where there aren't many workers and the area is not vented. Low intensity heating replicates the sun by generating radiant heat. This heater is usually suspended from ceilings by chains and are under the control of a thermostat.
Low intensity heaters have an enclosed flame. In order to produce heat a burner box triggers a mix of air and gas. A fan forces the air and gas mixture through tubing. The tube emits heat energy from the gas onto reflectors, which direct the warmth onto the floor. The objects in the direct line of the reflected heat warm the space to a comfortable level. This kind of heat starts at the ground level instead of the ceiling to create heat in the space.
If your warehouse space uses forced heat, each time someone opens a door the heat goes out. The system must start all over heating the space. With infrared heat, the heated floor acts the same way a reservoir does. It retains extra heat and will continue to heat the space until the heat lost by the open door is marginalized. This is a real benefit for industrial and commercial businesses that have loading docks in regular use.
There are a lot of benefits to using this kind of heating. One of the biggest is the financial savings. Forced air heating is about fifty percent less effective than infrared heat. This heating system is quieter, cleaner, and doesn't blow debris and dust all over the space like those that rely on blowers. This sort of heating as zoned capabilities. It can function independently or as a unit.
There are safety considerations to be taken into account when using this heater. You have to keep certain objects at a safe distance from the heaters when they have lower temperature ratings. It is important to shield certain items like lighting, gas and electrical lines, and parked cars.
About the Author:
For a closer look at the benefits of gas fired infrared heaters Ohio customers should turn to our recommended homepage and read all the information. Find what you need right here at http://www.westernreserveenergy.com/products.
No comments:
Post a Comment