Having a good looking patio is a great addition to any home. They last a long time and are a big step up from the plain cement driveway. Installing them takes quite a bit of work, but it is well worth it. There are several steps that have to be taken to prepare the site before the concrete can be poured. Stamped concrete patios Macomb provide a long-lasting and enjoyable addition for slightly more costly than a regular patio or driveway settings.
Staring out the area must be compacted. Construction workers have a machine that is heavy and specifically designed to compact the soil until is almost as hard as cement. This must be done at the start to make sure there is no chance of sinking of any part of the site. The next part is building the forms to hold the mix. These are made from wood and are held in place by stakes. Finally, putting gin reinforcement bars will help keep the mix in place and strengthen it.
After the preparation step is done the concrete is poured. This is usually done with the big mixing truck. For larger jobs, this is a must. For smaller jobs, they might bring in the smaller mobile mixer. However, the need to move fast is important because stamping process has to be done before the surface hardens. If it hardens before, then the cement has to be torn out and the job started over.
Finishing the surface is the next step to be done. Driveways and sidewalks often have a nonslip surface built into them. In this case that will not happen. They want a nice smooth surface to be able to take the shape of the mold when they put it in place. Coloring the surface also happens at this point in the process.
Stamping it needs to be done before it begins to harden. The moment it is poured, especially in a hot climate, the mix begins to harden. As this happens there will be a limited time to stamp the surface. Large molds are used to create the pattern. The layout should be predetermined in order to move quickly. The molds are placed on top of the cement and pressure is applied by a worker walking on top of one mold and using a tamping tool to press it into the mix.
Curing and sealing are the final steps. This part is designed to get the mix to harden all the way through and in a way that makes it very durable and hard. The sealing process is designed to help protect it from the elements such as cold, snow, rain, and hot summer suns. These can do quite a bit of damage without being properly sealed.
At the beginning of the process and throughout, special joints will be placed in order to help keep the patio from eventually cracking. Unlike the forms that will be removed after the mix hardens, these joints will stay in place. They allow the patio to expand and contract in cold and hot weather without cracking or buckling.
Having a nice looking patio adds to a home. The enjoyment of having something that looks so nice makes bar-b-ques and other family events feel great. The value this adds to the home is also a nice point when it's time to sell the house.
Staring out the area must be compacted. Construction workers have a machine that is heavy and specifically designed to compact the soil until is almost as hard as cement. This must be done at the start to make sure there is no chance of sinking of any part of the site. The next part is building the forms to hold the mix. These are made from wood and are held in place by stakes. Finally, putting gin reinforcement bars will help keep the mix in place and strengthen it.
After the preparation step is done the concrete is poured. This is usually done with the big mixing truck. For larger jobs, this is a must. For smaller jobs, they might bring in the smaller mobile mixer. However, the need to move fast is important because stamping process has to be done before the surface hardens. If it hardens before, then the cement has to be torn out and the job started over.
Finishing the surface is the next step to be done. Driveways and sidewalks often have a nonslip surface built into them. In this case that will not happen. They want a nice smooth surface to be able to take the shape of the mold when they put it in place. Coloring the surface also happens at this point in the process.
Stamping it needs to be done before it begins to harden. The moment it is poured, especially in a hot climate, the mix begins to harden. As this happens there will be a limited time to stamp the surface. Large molds are used to create the pattern. The layout should be predetermined in order to move quickly. The molds are placed on top of the cement and pressure is applied by a worker walking on top of one mold and using a tamping tool to press it into the mix.
Curing and sealing are the final steps. This part is designed to get the mix to harden all the way through and in a way that makes it very durable and hard. The sealing process is designed to help protect it from the elements such as cold, snow, rain, and hot summer suns. These can do quite a bit of damage without being properly sealed.
At the beginning of the process and throughout, special joints will be placed in order to help keep the patio from eventually cracking. Unlike the forms that will be removed after the mix hardens, these joints will stay in place. They allow the patio to expand and contract in cold and hot weather without cracking or buckling.
Having a nice looking patio adds to a home. The enjoyment of having something that looks so nice makes bar-b-ques and other family events feel great. The value this adds to the home is also a nice point when it's time to sell the house.
About the Author:
If you are interested in stamped concrete patios Macomb residential construction company is at your service. To request a free estimate, take a look at this site on http://www.agcconcrete.com/residential.html today.
No comments:
Post a Comment